Alloy of milling stainless steel, titanium, high temperature alloy all hard cutting when material, use suitable mill but twice raises milling cutter durability. Because asymmetry arranges mill law to be able to make sure cutting knife is cut smoothly from the metal,leave, area of contact of the felt that cut bits is lesser, the action that leaves mental efforts in high speed issues depart to drop. And when asymmetry goes against mill, leave the instantaneous of workpiece when cutting, tooth cuts cut bits thicker, be opposite not only the impact of edge is big, and the area that cuts bits and cutting tool felt is large, cut bits to be swung not easily, when tooth cuts work afresh, the ability that cut bits is pounded, on face of the knife before causing flake and collapse blade phenomenon, make cutting tool durability is reduced greatly; In the meantime, the cold good appearance after cutting of difficult cutting material is serious, sclerotic layer is right of cutting tool wear away the impact is very big, use suitable mill to be able to avoid tooth to be in already sclerotic apparently glide, and make sclerotic aggravate carries out carry out proof, tall to plasticity, cold good appearance is serious, generation kisses and the stuff with action and serious adhesiveness, the method that uses suitable mill is right of cutting tool durability rise most advantageous. When suitable mill, must milling machine the axial clearance of the nut of fore-and-aft guide screw is adjusted in 0. 1mm less than. CNC Milling
CNC Machining