How should be circular knife grinding machine packed

  • Time:
  • Click:167
  • source:LAMOND CNC Machining
Only the packing 　 of expensive circular knife grinding machine 1, before packing, answer to put the emulsification oily solution inside cooling box, secure box of good emulsification oily solution. 2, inner packing of circular knife grinding machine uses plastic film, outer packing uses wooden case. Inside box clearance is in due and shock-proof filler, one side circular knife grinding machine is sufferred in carriage process destroy. 3, wooden case should firm and reliable, have the measure that prevent rain, facilitating hoisting is carried. Lumber quality and part of one's job of simple case requirement do not accord with GB/T13384-92 in 5.

1.

1.

1 with 5.

1.

2.

The requirement of 1. 4, the appearance of the box that pack is due and not easy the following mark of rip off: (1) manufactory name and the site of factory; (2) product name and model; (3) accords with GB/T14436-93 to set " up " , " be afraid of rain " , " prohibit rolling " wait for graphic representation mark; (4) amount; (5) client name and address; (6) includes case over all dimension: "Long × wide × is tall " 　 　 5, the accompanying documents that pack should include: (1) writes the product certificate of approval that should accord with GB/T14436-93 to set; (2) product operation instruction handbook; (3) container load plan; (Detailed list of accessories of 4) random equipment. Only the carriage 　 of expensive circular knife grinding machine 1.

When carrying, must use those who contain canopy lid to carry a tool. Should press the case that pack when loading close, when spin is carried intense shake and cause damaged. 2.

Forbidden roll and intense collision. Only the 　 of keep in storage of expensive circular knife grinding machine 1.

Circular knife grinding machine should keep in storage is in environmental temperature - 10-55 ℃ , relative humidity is more than 90% , should not contain in air explode poisonously, perishably, combustibly, easily the place that waits for material. 2.

Limit of number of plies piling a code is. 3.

Deposit time to should not exceed 12 months continuously. CNC Milling CNC Machining