Outside the treatment method of round face

  • Time:
  • Click:138
  • source:LAMOND CNC Machining
Axis kind, cover kind and dish kind of typical spare parts that the spare parts is surface of the circle outside having. Outside the machining method with round commonly used face has turning, grinding rectifies treatment method with all sorts of light. Turning treatment is outside round face most the treatment method with effective economy, but with respect to its economical accuracy, general comfortable at regarding as outside exterior rough machining mixes the circle to submit finish machining method partly; Grinding treatment is outside round face is main finish machining method, special apply to all sorts of tall hardness and the finish machining of the spare parts after quenching; The superprecision method of the junior travel that smooth full treatment is finish machining (if boil,press, polishing, abrade etc) , apply to the spare parts with certain precision and exterior quality very high demand. Surface roughness of the economic treatment precision that as a result of all sorts of treatment the method can achieve, surface, productivity and manufacturing cost each are not identical, because this needs fibrous root occupies particular case, choose reasonable treatment method, machine the eligible part that gives the demand on blueprint of contented spare parts thereby. All sorts of treatment program and economy machine surface of the circle outside issueing a watch to be precision. Round face machines plan to express Normal MARGIN of Center" Align=center> serial number: 0cm 0cm 0pt; LINE-HEIGHT: 20pt; TEXT-ALIGN: Center" Align=center> machines methodological Normal Align=center> economical accuracy (tolerancepublic errand grade) Normal Align=center> economy / μ Mnormal MARGIN of Center" Align=center> scope of application: 0cm 0cm 0pt; LINE-HEIGHT: 20pt; TEXT-ALIGN: Center" Align=center>1normal MARGIN of Center" Align=center> thick car: 0cm 0cm 0pt; LINE-HEIGHT: 20pt; TEXT-ALIGN: Center" Align=center>IT13~IT11normal Align=center>50~12.

5normal Align=center> applies to quench all sorts of metal Normal Align=center>2normal Align=center> thick car - Normal Align=center>IT10~IT8normal Align=center>6.

3~3.

2normal Align=center>normal Align=center>3normal Align=center> thick car - half fine vehicle - fine vehicle Normal Align=center>IT8~IT7normal Align=center>1.

6~0.

8normal Align=center>normal Align=center>4normal Align=center> thick car - half fine vehicle - fine vehicle - boil press Normal Align=center>IT8~IT7normal Align=center>0.

2~0.

0255normal Align=center>normal Align=center>5normal Align=center> thick car - half fine vehicle - grinding Normal Align=center>IT8~IT7normal Align=center>0.

8~0.

4normal Align=center> basically is used at quenching steel, also can use at quenching steel, but do not apply to nonferrous metal Normal Align=center>6normal Align=center> thick car - half fine vehicle - kibble - essence of life grinds Normal Align=center>IT7~IT6normal Align=center>0.

4~0.

1normal Align=center>normal Align=center>7normal Align=center> thick car - half fine vehicle - kibble - essence of life grinds - superfinishing (or annulus type exceeds essence of life to grind) Normal Align=center>IT5normal Align=center>0.

1~0.

012(or Rz0.

1)normal Align=center>normal Align=center>8normal Align=center> thick car - half fine vehicle - fine vehicle - careful car (King Kong car) Normal Align=center>IT7~IT6normal Align=center>0.

4~0.

025normal Align=center> basically uses at the requirement taller nonferrous metal Normal Align=center>9normal Align=center> thick car - half fine vehicle - kibble - essence of life grinds - exceed essence of life to grind (or lens face grinds) Normal MARGIN of Center" Align=center>IT5 above: 0cm 0cm 0pt; LINE-HEIGHT: 20pt; TEXT-ALIGN: Center" Align=center>0.

025~0.

006(or Rz0.

1)normal Align=center> extremely of high accuracy outside round treatment Normal Align=center>10normal Align=center> thick car - half fine vehicle - kibble - essence of life grinds - abrade Normal MARGIN of Center" Align=center>IT5 above: 0cm 0cm 0pt; LINE-HEIGHT: 20pt; TEXT-ALIGN: Center" Align=center>0.

1~0.

012(or Rz0.

1)normal Align=center> CNC Milling CNC Machining